Thursday, November 21, 2013

DIY Jewelry Holder Displays


Hey hey Hey!
Man...sorry I've been MIA...
it just gets crazy around here this time of year!
And I'm armpit deep in the secret project...
but it's coming along nicely.

In the meantime...here's an awesome way to
not only store all your fabulous adornments...
but also to showcase some of your favorites!

Some DIY Jewelry Holders or Displays!


I started with a fancy 8 X 10 frame from HobLob for 1/2 off...
some scrap wood {as yet undecided at picture time}...
and some knobs, also from HobLob, on clearance!!!


I measured my sheet of tin to fit the back of the frame
and just marked it off with a Sharpie.
Yes, my Sharpie is pink.
What of it?


This sheet is 12" by 24" so I measured in such a way that I
could actually get 3 this size out of this sheet if I decided to make more.
That actually cuts the cost if you consider you can make 3 gifts with one sheet.

Tin snips are a must for this job.
Makes it so easy.
Just snip, snip, snip...and you're done!


Next it was time for paint.
Never forget it!

We had some gold spray paint...and it was rather SHINY...
to detract from that a bit, I held a can of Oil Rubbed Bronze over
the frame and lightly sprayed so it speckled the gold.
Poifect.


Well, almost.
I decided a little more depth was in order.
I lightly wiped on some chalk paint...{the pic below}
distressed a little...speckled some more with gold, then ORB...
then I finally put a top coat on.
Layers, layers, layers.


Once it was all dry, I glued the tin sheet into the
back of the frame with some E6000 glue
You want it to sit down in the recess of the frame
so there's a space for your hooks to hang.

What hooks, you say?
These hooks, of course.
Well, and all those long, dangly French hook
earrings you've been known to wear.

These are pretty small...about 3/4" to an inch long.
They came 6 to a pack.
I opened them up just a tad so they could easily hang on the
tin sheet and hold rings or big earrings or thin bangles.

Then they got a healthy dose of gold spray paint.


Next is the knobby necklace holder.
Here's my piece of scrap wood.
This piece is a 1 X 3 cut to about the same width as the frame.

I wanted 3 knobs on here,
so I measured them out so they'd be even.
Then drill a hole all the way through big enough
to fit the screw of your knob.


Next, use a forstner bit to make a shallow
hole on the back side of your board.
Be careful that you only go about half way through!


Like this, see?
The reason is, since we're using knobs,
they have a nut on the back to hold it on.
You don't want that nut sticking out the back
once you've put the knob on, right?
Of course not!


All that's left is to paint it your heart's desire...add your knobs...

and VOILA!



I spray painted the wood first with the same color as the tin sheet.
Then I used chalk paint so I could distress it
and have a little of the plum show through.



I don't know about you, but I just love how they turned out!


Because of the holes I drilled in the back of the board,
I was able to just hang it on some small nails.
You could attach hangers, or even use Command Strips I suppose.



Here's a closer look at the final finish on the paint.
Kind of antique-y, don't ya think?




And here's a better look at those nice little hooks...
they're great for hoops, bracelets, and even rings.




Whaddya think?
Did you just add one to your Christmas list?
For you or someone else?
I certainly hope the person I made
these for likes them as much as I do!
{see them in their final home here}

It was a pretty quick project.
The longest part is waiting for the paint to dry.

Well, off I go, back to work on my to do list

Hope you guys have a wonderful weekend!



Sharing here:

Lamberts Lately
From My Front Porch To Yours
Embracing Change
Saving 4 Six
The Craft Dictator
A Peek Into My Paradise
Redoux Interiors
Crafts a la Mode
Lil' Luna
WhipperBerry
Cheerios and Lattes
I Should Be Mopping The Floor
DIY Showoff
The Dedicated House
Averie Lane
Dwellings
Stone Gable
My Uncommon Slice of Suburbia
Love Grows Wild
A Stroll Thru Life
Cedar Hill Farmhouse
Life With the Crust Cut Off
Ivy and Elephants
 Love of Family and Home
Put a Bird On It
Will Cook For Smiles
Serenity You
Live Love Create
Glitter, Glue, and Paint

8 comments:

  1. That is a really cute idea, Kelly. I could sure do something with my stuff -it is all in a compartmentalized drawer but it still gets messy and tangled. Love it-you did a great job. xo Diana

    ReplyDelete
  2. Great ideas! I have some knobs to use now I just need to find some scrap wood.

    ReplyDelete
  3. Not only a great idea, it looks awesome. Thanks for sharing. I'm Connie at http://hotflashncraftn.blogspot.com, a new GFC friend.

    ReplyDelete
  4. This looks incredible. I really need to make something like this to keep my jewelry from getting all tangled.

    ReplyDelete
  5. These are sooooo cute! I've been wanting to make a jewelry holder forever and this is a great idea.

    I'm hosting a link party and would love for you to link up!

    Take care,
    Daniela

    http://iputabirdonit.blogspot.com/2013/11/my-favorite-free-christmas-fonts-and.html?m=1

    ReplyDelete



  6. Great project !!

    I would love you to come and share @ Craft, Create & Inspire linky party !!!

    Look forward to seeing you there :)

    http://lemonpaperdesigns.blogspot.co.uk/2013/11/craft-create-inspire-linky-party-8.html

    Claire x

    ReplyDelete
  7. Just beautiful, my dear! And I'm so excited for you as you transition into this beautiful new phase of your life. Much love to you!
    mens diamond jewelry

    ReplyDelete

Sweet comments make me a happy girl!
I love and read each and every one!
I do my best to respond to all of them...even though it may take a while...questions I try to answer right away.